ARCCAPTAIN TIG205P Pro 120V/240V DC Pulse TIG Welder Basic Kit
About this product
Product details from Arccaptain:
Bundle Summary
In addition to the welder's standard accessories, this kit includes a compatible TIG foot pedal and extra blue tungsten electrodes. Adjust welding current during supported TIG operation and keep replacement tungsten available for steel, stainless steel, copper, and other compatible DC TIG projects.
Bundle Highlights
Adjust Heat While Welding
Use the compatible foot pedal to vary amperage during supported TIG operation without moving either hand from the torch and filler rod.
Extra Tungsten Within Reach
Keep replacement blue tungsten electrodes available when a tip becomes contaminated, worn, or requires regrinding.
Five Welding Functions Available
Choose HF DC TIG, Pulse TIG, Lift TIG, Spot TIG, or MMA/Stick according to the material, joint, and welding procedure.
Less Separate Accessory Shopping
Get the welder, compatible pedal, and replacement tungsten together in one coordinated purchase.
Extra Accessories Included in This Kit
Everything below is included in addition to the standard accessories supplied with the welder.
Fine-Tune Amperage at the Joint
Vary TIG welding current by foot on supported settings while keeping both hands positioned for torch and filler control.
The included pedal is compatible with the ARCCAPTAIN TIG205P Pro. Connect and operate it according to the machine and pedal instructions.
Keep Replacement Electrodes on Hand
Use the extra electrodes in compatible DC TIG setups and replace contaminated or worn tips without relying only on the original supply.
Confirm that the electrode diameter matches the installed collet, collet body, and the supplied WP-26 torch setup before welding.
Best-Fit Applications
Precision Steel TIG Welding
Use the TIG205P Pro and supplied WP-26 torch for compatible mild-steel TIG work. Select suitable DC TIG settings and vary amperage as the joint heats up.
Stainless Steel Fabrication
Use DC TIG or Pulse TIG for suitable stainless joints. Prepare the tungsten correctly and select filler metal that matches the base material and procedure.
Garage & Workshop Projects
Use DC TIG for controlled bench work or switch to MMA/Stick for suitable repair tasks with compatible, separately purchased stick electrodes.
How to Use This Kit
- Identify the base metal and select a suitable DC TIG process, tungsten size, filler metal, and torch consumables.
- With input power disconnected, connect the WP-26 TIG torch, work clamp, gas hose, and compatible foot pedal as directed in the user manual.
- Connect a filled 100% argon cylinder with a compatible regulator/flowmeter, then check all gas connections.
- Select a TIG mode that supports pedal control, set the required parameters, and test the setup on matching scrap material.
- Use pedal travel to vary current while maintaining torch angle, arc length, and filler-rod control.
- Stop and regrind or replace the tungsten if it becomes contaminated. Follow the manual's shutdown procedure after welding.
Additional Equipment and PPE Required
TIG welding requires additional equipment that is not listed as a kit extra:
- A filled 100% argon cylinder and compatible regulator/flowmeter
- Suitable filler metal when required by the joint and welding procedure
- A compatible 120V or 240V power connection that meets the user manual requirements
- A correctly configured welding helmet, welding gloves, protective clothing, and all other task-appropriate PPE
- Compatible coated electrodes when using MMA/Stick mode
More deals from Arccaptain
-38%
-35%
-33%
-33%
-33%
-32%
-32%
-28%