ARCCAPTAIN TIG205 Pro 205A Dual-Voltage DC TIG Welder Basic Pack
About this product
Product details from Arccaptain:
TIG205 Pro Precision Control Kit
Bundle Summary
In addition to the welder’s standard accessories, this kit includes a TIG foot pedal and a 49-piece torch parts kit, adding hands-free current control and spare components for compatible WP-26 torch maintenance during steel and stainless-steel TIG work.
DC TIG Process Notice
The TIG205 Pro provides HF DC TIG, Cold/Spot TIG, and MMA/Stick welding. It does not provide AC TIG for conventional aluminum TIG welding.
Bundle Highlights
Hands-Free TIG Current Control
Adjust amperage by foot while keeping both hands positioned for torch and filler-rod control.
Spare Parts Within Reach
Keep compatible torch components nearby for routine wear-part replacement and setup changes.
DC TIG and Stick Capability
Use HF DC TIG, Cold/Spot TIG, or MMA/Stick for suitable fabrication and repair tasks.
Fewer Separate Purchases
Get the welder, compatible foot control, and spare torch parts in one purchase.
Extra Accessories Included in This Kit
Everything below is included in addition to the standard accessories supplied with the welder.
TIG Foot Pedal ×1
Foot-Controlled AmperageAdjust Heat While Welding. Adjust TIG amperage by foot while keeping both hands positioned for steady torch and filler-rod control at the joint.
Compatibility: Designed for the ARCCAPTAIN TIG205 Pro; use only in TIG modes that support remote current control according to the manual.
49-Piece TIG Torch Parts Kit ×1
Torch Service PartsKeep Replacement Parts Nearby. Keep compatible TIG torch components within reach to reduce interruptions during routine maintenance and setup changes.
Compatibility: Compatible with the supplied WP-26 torch; match every part to the torch configuration and selected tungsten size before installation.
Best-Fit Applications
Repeated Bench Fabrication
Steel brackets and stainless-steel assemblies where foot control supports heat adjustment and spare parts support routine torch maintenance.
TIG Practice and Skill Building
Practice on suitable steel or stainless-steel coupons while coordinating pedal, torch, and filler-rod movement.
Mixed Shop Repair Work
Use DC TIG for suitable joints or switch to MMA/Stick with separately purchased electrodes and task-appropriate PPE.
How to Use the Kit
Identify the base metal and select suitable tungsten, compatible torch parts, and filler metal; prepare a clean joint.
Disconnect input power before making connections. Attach the WP-26 torch, work clamp, gas hose, and foot pedal as directed in the manual.
Connect a compatible regulator or flow control and a filled argon cylinder, then verify gas delivery and the required input-power setup.
Select a supported DC TIG pedal-control mode, set suitable parameters, and make a test weld on matching scrap material.
Adjust amperage with the pedal during the weld; replace worn torch parts only with correctly matched components.
For MMA/Stick work, change the setup as directed in the manual and use suitable separately purchased electrodes; the TIG foot pedal is not used.
Additional Equipment and PPE Still Required
TIG welding requires a filled argon cylinder, compatible regulator or flow control, correctly matched filler metal when needed, and a suitable power circuit and connection. MMA/Stick welding requires compatible Stick electrodes.
Use a properly rated welding helmet, welding gloves, protective clothing, and all other task-appropriate PPE. Shielding gas, cylinder, regulator or flow control, filler rods, Stick electrodes, and PPE are not listed as extras in this kit.
More deals from Arccaptain
-38%
-35%
-33%
-33%
-32%
-32%
-28%-28%