Arccaptain TIG200 DC TIG Welder HF TIG/Stick Inverter Welder Fabricator Kit
About this product
Product details from Arccaptain:
Bundle Summary
In addition to the TIG200 welder’s standard accessories, this kit includes a 49-piece TIG torch parts kit, welding gloves, a welding helmet, and 2.4 mm (3/32 in) blue-coded tungsten electrodes. Keep compatible torch parts and replacement tungsten available while adding basic welding protection for steel and stainless steel fabrication.
Bundle Highlights
Keep TIG Projects Moving
Compatible torch parts and additional tungsten help with consumable replacement and setup changes between fabrication jobs.
Add Basic Welding Protection
The included helmet and gloves add basic eye, face and hand coverage when correctly configured, inspected and used.
Switch Between TIG And Stick
Use HF DC TIG for suitable steel fabrication or switch to Stick mode for repair work with compatible coated electrodes.
Reduce Separate Accessory Purchases
Get torch parts, replacement tungsten, a welding helmet and welding gloves together with the welder.
Extra Accessories Included In This Kit
Everything below is included in addition to the standard accessories supplied with the TIG200 welder.
Support Routine Torch Maintenance
Keep compatible TIG torch wear parts nearby for routine maintenance and setup changes, reducing the need to source individual components between projects.
Add Basic Hand Coverage
Add a basic protective layer for suitable welding and material-handling tasks.
Add Eye And Face Coverage
Use the included welding helmet for suitable arc-welding tasks after correctly configuring its fit, controls and shade settings.
Keep Extra Tungsten On Hand
Keep additional blue-coded lanthanated tungsten available for compatible DC TIG work and replacement of worn or contaminated electrodes.
Maximum Output By Input Voltage
Best-Fit Applications
- Steel And Stainless Steel TIG Work: Bench fabrication using the correct tungsten preparation, filler metal and shielding gas.
- Repeated TIG Shop Work: Projects that benefit from additional 2.4 mm tungsten and compatible WP-17 torch parts.
- Fabrication Training: Practice and shop work where bundled basic helmet and glove coverage adds convenience.
- General Stick Repairs: Suitable repair jobs using compatible coated electrodes and the TIG200 electrode holder.
How To Use The Kit
- Identify the base metal and select a suitable process, filler metal or Stick electrode, and welding parameters.
- For TIG welding, connect the supplied WP-17 torch, work clamp and gas hose according to the TIG200 manual.
- Install the 2.4 mm tungsten only with a matching collet and compatible torch parts. Prepare the electrode tip for the selected DC TIG procedure.
- Connect the welder to a compatible 110V or 220V circuit and connect a filled argon cylinder through a suitable regulator or flowmeter.
- Inspect and correctly configure the included helmet and gloves, then test welding settings on matching scrap.
- For Stick welding, change the setup according to the manual and use suitable coated electrodes with all required PPE.
Additional Equipment And PPE Required
For TIG welding: A filled 100% argon cylinder, compatible regulator or flowmeter, suitable filler metal when required, and a compatible electrical circuit are needed. The supplied gas hose does not replace the cylinder or regulator.
For Stick welding: Compatible coated electrodes are required.
Safety: The included helmet and gloves provide only part of the required protection. Flame-resistant protective clothing, suitable footwear and all other task-appropriate PPE are still required. Follow the equipment manuals and applicable workplace safety requirements.
More deals from Arccaptain
-38%
-35%
-33%
-33%
-33%
-32%
-28%-28%