Arccaptain TIG200P 200A DC Pulse TIG Welding Essentials Kit
About this product
Product details from Arccaptain:
Bundle Summary
In addition to the welder’s standard accessories, this kit includes a TIG foot pedal for convenient amperage adjustment during supported TIG welding. Adjust heat at the joint while keeping both hands positioned for steady torch and filler-metal control.
Bundle Highlights
Adjust Heat At The Joint
Use the foot pedal to vary TIG amperage as heat builds in the workpiece.
Keep Both Hands Positioned
Control current by foot while maintaining torch angle and filler-metal placement.
Welder And Pedal In One Kit
Get the TIG200P and a compatible foot pedal together for bench and shop welding setups.
TIG And Stick Flexibility
Use supported DC TIG processes for controlled welds or switch to Stick (MMA) for suitable repair work.
Extra Accessory Included In This Kit
Everything shown below is included in addition to the standard accessories supplied with the welder.
Adjust Heat While Welding
Adjust TIG amperage by foot as the joint heats up, keeping both hands available for steady torch and filler-metal control.
Best-Fit Applications
- Steel And Stainless Steel TIG Work: Suitable joints where DC TIG and in-process amperage adjustment improve puddle and heat control.
- Thin Or Heat-Sensitive Parts: Bench work where reducing current as the material warms can help limit excess heat input.
- Starts, Corners And Joint Transitions: Applications that benefit from adjusting current as joint geometry changes.
- General Shop Repairs: Switch to Stick mode with compatible, separately purchased coated electrodes when TIG is not the preferred process.
How To Use The Kit
- Identify the base metal and select a suitable welding process, tungsten electrode and filler metal.
- With input power disconnected, connect the TIG torch, work clamp, gas system and foot pedal as directed in the TIG200P manual.
- Connect the welder to a compatible 110V or 220V power supply that meets the manual’s circuit requirements.
- Select a TIG mode that supports foot-pedal amperage control, set the required parameters and test the setup on matching scrap.
- Use pedal travel to adjust current while maintaining torch angle, travel speed and filler-metal placement.
- For Stick welding, change the setup according to the manual and use suitable coated electrodes. The TIG foot pedal is not used in Stick mode.
Additional Equipment And PPE Required
For TIG welding: A filled 100% argon cylinder, compatible regulator or flowmeter, suitable tungsten and filler metal as required, and a compatible electrical connection are needed unless specifically listed with the welder’s standard accessories.
For Stick welding: Compatible coated electrodes are required. The foot pedal is not used for Stick welding.
Safety: Always use a suitable welding helmet, welding gloves, flame-resistant protective clothing and all other task-appropriate PPE. Follow the operator’s manual and applicable workplace safety requirements.
More deals from Arccaptain
-38%
-35%
-33%
-33%
-33%
-32%
-32%
-28%