ARCCAPTAIN TIG200P 200A 110V/220V DC Pulse TIG Welder Stainless Kit
About this product
Product details from Arccaptain:
Bundle Summary
In addition to the welder’s standard accessories, this kit includes a TIG foot pedal, a 71-piece TIG torch parts kit, welding gloves, and 2.4 mm (3/32 in) blue-coded tungsten electrodes. Add convenient current control, compatible torch spares, replacement tungsten, and basic hand coverage to your stainless steel TIG setup.
Bundle Highlights
Control Heat On Stainless Steel
Adjust TIG amperage by foot while keeping both hands focused on torch position and filler-metal placement.
Keep Torch Spares Within Reach
The 71-piece parts kit supports routine maintenance and setup changes with compatible WP-26 torch components.
Extra Tungsten For Replacement
Keep additional 2.4 mm blue-coded tungsten available when an electrode needs sharpening or replacement.
Control And Hand Coverage Together
Get pedal control and welding gloves in one purchase to simplify your TIG shop setup.
Extra Accessories Included In This Kit
Everything below is included in addition to the standard accessories supplied with the welder.
Keep Torch Spares Available
Keep replacement TIG torch parts on hand for routine maintenance and setup changes, helping reduce interruptions when wear parts need attention.
Add Basic Hand Coverage
Add a basic protective layer for suitable welding and material-handling tasks.
Adjust Heat While Welding
Adjust TIG amperage by foot as the joint heats up, keeping both hands available for steady torch and filler-metal control.
Keep Replacement Tungsten Available
Keep additional blue-coded lanthanated tungsten available for compatible DC TIG work when an electrode needs sharpening or replacement.
Best-Fit Applications
- Stainless Steel Bench Fabrication: Brackets, frames and shop-fabricated parts where foot control supports in-process heat adjustment.
- Thin Or Heat-Sensitive Joints: Work that benefits from reducing current as the material and joint warm up.
- Repeated TIG Shop Work: Projects that benefit from spare tungsten and compatible WP-26 wear parts being kept nearby.
- General Steel Repairs: Suitable mild-steel TIG work with correctly matched filler metal, or Stick repairs with separately purchased coated electrodes.
How To Use The Kit
- Identify the stainless steel grade or other base metal and select compatible filler metal, tungsten preparation and welding parameters.
- With input power disconnected, connect the supplied TIG torch, work clamp, gas system and compatible foot pedal according to the TIG200P manual.
- Install the 2.4 mm tungsten only with a matching collet and compatible torch components. Use parts from the 71-piece kit only when they match the selected setup.
- Connect the welder to a compatible 110V or 220V power supply that meets the manual’s circuit requirements.
- Select a TIG mode that supports foot-pedal amperage control, set the gas flow and welding parameters, and test the setup on matching scrap.
- Use pedal travel to adjust current while maintaining torch angle and filler-metal control. For Stick welding, follow the manual and disconnect or disregard the TIG pedal as directed.
Additional Equipment And PPE Required
For TIG welding: A filled 100% argon cylinder, compatible regulator or flowmeter, correctly matched stainless steel filler metal as required, and a suitable electrical connection are needed unless specifically listed with the welder’s standard accessories.
For Stick welding: Compatible coated electrodes are required. The TIG foot pedal is not used for Stick welding.
Safety: Wear the included gloves together with a properly rated welding helmet, flame-resistant protective clothing and all other task-appropriate PPE. Follow the operator’s manual and applicable workplace safety requirements.
More deals from Arccaptain
-38%
-35%
-33%
-33%
-33%
-32%
-32%
-28%