ARCCAPTAIN TIG200P AC/DC 200A Black Friday Limited Kit
About this product
Product details from Arccaptain:
Bundle Summary
Three filler alloys. More equipped for TIG work.
In addition to the welder's standard accessories, this Black Friday kit includes 15 lb of TIG filler rods—5 lb each of ER4043 aluminum, ER70S-6 mild steel, and ER308L stainless steel—plus a TIG foot pedal, a 71-piece torch parts kit, red tungsten electrodes, a welding helmet, gloves, an apron, and a bonus TIG torch holder.
Bundle Highlights
Three Metals, More Flexibility
Choose filler matched to compatible aluminum, mild-steel, or stainless-steel joints.
Foot-Controlled Amperage
Adjust current during supported TIG operation while guiding the torch and filler rod.
Torch Spares on Hand
Keep compatible service parts and additional red tungsten available for DC TIG work.
Protective Accessories
Add a helmet, gloves, and apron, plus a designated place to rest the TIG torch.
Filler for Three Metal Types
Use AC TIG for compatible aluminum joints and DC TIG for suitable mild-steel and stainless-steel work. Choose each filler alloy for the actual base metal and service requirements.
Aluminum TIG Filler Rods
Support fabrication and selected repairs on compatible aluminum alloys. ER4043 is not a universal filler for every aluminum grade.
Included: 5 lbMild Steel TIG Filler Rods
Add filler metal to suitable mild-steel joints for brackets, general fabrication, and compatible repair work.
Included: 5 lbStainless Steel TIG Filler Rods
Supply filler for compatible stainless-steel joints. Confirm the base-metal grade; ER308L is not appropriate for every stainless or dissimilar-metal joint.
Included: 5 lbCurrent Control and Consumables Within Reach
TIG Foot Pedal
Vary amperage by foot during supported TIG control settings while keeping both hands positioned for torch and filler control.
Use only as directed in the TIG200P AC/DC manual.TIG Torch Parts Kit
Keep replacement components available for the supplied WP-26 torch. Match every part to the installed configuration and selected tungsten diameter.
Use matched parts; not all 71 pieces are installed together.Red Tungsten Electrodes
Keep extra electrodes available when DC TIG tips become worn or contaminated. Confirm the classification and diameter on the packaging before preparation.
Verify AC-suitable tungsten is available for aluminum work.Added Coverage for Welding Tasks
Inspect, select, and use each accessory according to its instructions and the welding task. These items are not a complete PPE system.
Welding Helmet
Provides eye and face coverage when properly rated, adjusted, and used. Check the required lens shade and the helmet's suitability for the selected TIG current.
Welding Gloves
Add hand coverage during appropriate welding tasks. Inspect the gloves before use and select protection suited to the heat and handling hazards.
Welding Apron
Add front-of-body coverage over appropriate welding clothing. The apron does not replace required arm, leg, foot, or other task-specific protection.
A Designated Place for Your TIG Torch
No additional charge
TIG Torch Holder
Keep the torch in a designated resting position between welds to help organize the bench. Position the holder securely as directed by its instructions and keep hot components clear of combustible materials.
Standard Accessories vs. Kit Extras
The TIG200P AC/DC welder is included. Its standard accessories and this bundle's additional items are listed separately below.
Standard Accessories Included with the Welder
Original equipment supplied with the TIG200P AC/DC—not counted again as bundle extras.
- 13 ft WP-26 TIG torch ×1
- 10 ft work clamp ×1
- 10 ft Stick electrode holder ×1
- Input-power conversion adapter ×1
- Argon gas hose ×1
- Brush and hammer set ×1
- Standard tungsten electrode ×1
- Gas regulator ×1
- Product manual ×1
Extra Accessories Included in This Kit
Everything below is included in addition to the welder's standard accessories.
- ER4043 aluminum TIG filler rods — 5 lb
- ER70S-6 mild steel TIG filler rods — 5 lb
- ER308L stainless steel TIG filler rods — 5 lb
- TIG amperage-control foot pedal ×1
- 71-piece TIG torch parts kit ×1
- Additional red tungsten electrodes
- Welding helmet
- Welding gloves
- Welding apron
- TIG torch holder — included bonus
Important S…
More deals from Arccaptain
-38%
-35%
-33%
-33%
-33%
-32%
-32%
-28%