Arccaptain CUT65MP NON-HF CNC Plasma Cutter
About this product
Product details from Arccaptain:
ARCCAPTAIN CUT65MP — Plasma Cutter
65 Amps Plasma Cutter With CNC Interface
Max Clean Cut @ 240V
3/4" / 20mm
Severance up to 1-1/4" / 32mm
Warranty
3Years
Standard outlet or shop power
CNC Platforms Supported
5 systems
PlasmaCam · Torchmate · Langmuir · Mach3 · LinuxCNC
Operating Modes
4 modes
Cut · Grid Cut · Plasma Gouging · Rust Removal
Key Feature 01
CNC-Ready Right Out of the Box
The CUT65MP ships with a built-in CNC interface and cable
Whether you're cutting custom brackets, metal signs, or structural components by hand today, the CUT65MP keeps your options open. When you're ready to step up to consistent, automated cuts on a CNC plasma table, the machine is already wired for it.
The CUT65MP uses a standard CNC signal interface and comes with the connection cable. Plug in and cut.
Confirmed Compatible With
Your Upgrade Path
Hand-torch cutting
Full manual control — cut signs, brackets, and custom shapes out of the box.
↓
Connect a CNC table
When volume grows, connect to any compatible table — the port and cable are already included.
↓
Automated, repeatable precision
Consistent cuts at production speed. No re-buy. Your original investment pays off twice.
Key Feature 02
One Machine, Four Modes — Cut, Gouge, Clean and More
MODE 01
Plasma Cutting
Clean, fast cuts on steel, aluminum, and more.
Cuts mild steel, stainless, aluminum, copper, and other conductive metals. Non-contact pilot arc starts cleanly on painted or rusted surfaces.
Best For
Sheet metal, structural steel, custom parts, signs, and general shop cutting
MODE 02
Grid Cut Mode
Arc keeps dropping on grating and mesh? Not with this mode.
Stabilizes the arc across gaps, holes, and perforations. Grid Cut Mode keeps cutting straight through without stopping.
Best For
Safety grating, livestock panels, chain-link, expanded metal, salvage work
MODE 03
Plasma Gouging
Back-gouge and bevel prep — no carbon rods needed.
Replaces carbon arc gouging for weld root removal and bevel prep. Less spatter, more control.
Best For
Weld root removal, bevel prep, repair work, removing old welds
MODE 04
Rust Removal Mode
Gets into corners where grinders can't reach.
Low-power sustained arc for surface cleaning and pre-weld prep. Cleaner surface, stronger weld.
Best For
Pre-weld cleaning, mill scale removal, farm equipment maintenance, structural repair prep
Key Feature 03
Dual Voltage
Works on a standard household outlet right out of the box. Switch to 240V in your shop and the CUT65MP opens up to 3/4" clean cut capacity.
Input
240V
RecommendedClean Cut
3/4" / 20mm
Severance
1-1/4" / 32mm
Input
120V
Clean Cut
3/8" / 10mm
Severance
1/2" / 13mm
The 1-1/4" severance capacity covers thicker material when you need it — useful for demolition, salvage work, and heavy structural teardown. Two voltage options, one machine, no hardware changes.
Who It Is For
Four Real-World Scenarios
The CUT65MP was built around how working people actually use a plasma cutter — not just how specs look on paper.
DIY & Garage Builder
- Works on 120V household power right out of the box
- Large display with clear fault codes — no guessing when something trips
- CNC-ready interface built in for when you upgrade
- Four modes without buying four separate tools
Small Fabrication Shop
- Plug-and-play with PlasmaCam, Torchmate, Langmuir, Mach3, LinuxCNC
- Grid Cut Mode for grating and mesh — no arc interruptions
- Plasma gouging built in — removes a separate tool from the floor
- Smart cooling and protection system for all-day run cycles
Farm Repair
- Grid Cut Mode for livestock panels, chain-link, and perforated stock
- Rust Removal Mode cleans corroded surfaces without a grinder
- Built-in air gauge with auto-drain — less to manage in the field
- 240V capacity for heavy structural repair and thick plate
Small CNC Studio & Maker Shop
- CNC cable and port included — no adapter boxes, no signal loss
- Works with PlasmaCam, Torchmate, Langmuir, Mach3, LinuxCNC
- 3/4" clean cut at 240V for production-quality output
- Use handheld between CNC jobs — two workflows, one machine
Built-In Quality
The Details That Matter on a Long Workday
Larger Display and Built-In Air Gauge
A bigger screen means you can read current, voltage, and settings without leaning in or removing your helmet.
Cooling Fan — Runs Only When Needed
The fan activates on demand instead of running constantly. The result is less dust pulled through the internals, and longer component life over time.
Multi-Layer Protection With Fault Codes
Over-heat, over-current, IGBT low-voltage, and input under-voltage protection are all built in.
Specifications
CUT65MP — Complete Specifications
| Specification | Value |
|---|---|
| Input Voltage | 120V / 240V |
| Input Frequency | 50 / 60 Hz |
| Max Clean Cut — 240V | 3/4" (20mm) |
| Max Severance Cut — 240V | 1-1/4" (32mm) |
| Max Clean Cut — 120V | 3/8" (10mm) |
| Max Severance Cut — 120V | 1/2" (13mm) |
|
Warranty |
3 Years |
| Compatible CNC Systems | PlasmaCam, Torchmate, Langmuir Systems, Mach3, LinuxCNC |
| Operating Modes | Plasma Cutting, Grid Cut Mode, Plasma Gouging, Rust Removal |
| Pilot Arc | Non-Contact (Non-HF) — starts on painted, rusty, or coated surfaces |
| Display | Large LED Panel with Fault Code Output |
| Air Gauge | Built-In Panel Gauge with Auto-Drain |
| Cooling System | Demand-Driven Smart Fan |
| Protection System | Over-Heat, Over-Current, IGBT Low-Voltage, Input Under-Voltage |
| Compatible Materials | Mild Steel, Stainless Steel, Aluminum, Copper, and other conductive metals |