Arccaptain CUT65 HF 65A Heavy-Duty Plasma Cutter
About this product
Product details from Arccaptain:
65-Amp Heavy-Duty Plasma Cutter Built for Real Work
Dual-voltage 110V/220V power, three cutting modes, and a professional P80 torch — one machine that handles everything from sheet metal to heavy steel plate.
Pro-Grade Cutting Power for the Home Shop
Most home-use plasma cutters max out at 40 or 50 amps and struggle with thick plate, painted surfaces, or rusty metal. The Arccaptain CUT65 delivers 65 amps of true cutting power — enough to handle heavy equipment repair, fabrication shop work, and demanding DIY projects without hesitation.
It runs on both 110V household power and 220V shop power. Plug it in wherever you work, and scale the output to match the job. Whether you are cutting thin aluminum panels or slicing through inch-thick steel plate, this machine stays in control.
One Machine, Two Power Options
Simply flip the voltage selector to match the outlet in your garage, shop, or job site. No adapters, no separate machines.
- Max Cut1-3/16" (30mm)
- Clean Cut3/4" (20mm)
- Best ForHeavy plate, fabrication, equipment repair
- Recommended ForMetals over 18mm
- Max Cut5/8"
- Clean Cut7/16"
- Best ForSheet metal, thinner stock, everyday DIY
- Power SourceStandard garage outlet
Three Cutting Modes for Three Different Jobs
Most plasma cutters have one mode. The CUT65 has three — so you are never fighting the machine to get a clean result on challenging material.
Delivers clean, stable cuts on flat metal plate. Ideal for straight-line cuts, templates, structural work, and any job where a smooth edge matters. The standard mode for everyday fabrication and repair tasks.
Maintains a consistent arc as the torch crosses open voids in mesh and grating. Without this mode, a conventional plasma arc can extinguish at every gap. Expanded Metal mode keeps cutting smoothly from start to finish.
Quickly blasts away surface rust, old paint, and thick coatings to expose clean base metal — without cutting through the part. Prepare steel for welding or cutting in a fraction of the time it takes with a grinder.
Precise Cuts, Start to Finish
Accuracy depends on the torch in your hand and the information in front of your eyes. The CUT65 delivers on both.
A high-performance P80 torch provides stable arc output and smooth cut quality. It runs cooler and lasts longer than the standard torches found on entry-level machines.
Clip on the roller guide to maintain a consistent standoff distance between the torch tip and the metal. The result is a straighter cut line — especially useful on long runs and repeated cuts where drift adds up.
2T mode works like a standard hold-to-cut trigger. 4T lets you lock the arc on so you can focus on guiding the torch without keeping the trigger depressed — a real benefit on long cuts.
The biggest LED display in its class shows amperage, air pressure, and system status at a glance. No guessing about your settings — everything is visible from across a workbench.
Cuts What You Work With
The CUT65 is not limited to clean, new stock. It handles the real-world materials found on job sites and in home workshops.
Built to Last Through Long Workdays
The cooling system and protection circuits in the CUT65 are designed to keep the machine running safely and efficiently — even during extended use in dusty shop environments.
The intelligent fan only runs when the machine actually needs cooling. That means up to 35% less fan noise compared to always-on designs — and less wear on the fan motor over time.
Demand-based cooling combined with IGBT inverter technology extends the machine's service life by up to 45%. That is a significant difference when you are using this tool for years of daily shop work.
Overload, overheating, overcurrent, and IGBT low-voltage protection all monitor the machine in real time. Clear error alerts on the LED display tell you exactly what needs attention — no guesswork.
Who Uses the CUT65 HF
The CUT65 was designed to handle the full range of cutting jobs — from weekend projects to professional-grade production work.
You want a machine that can handle real projects — trailers, truck beds, brackets, frames — not just thin sheet metal. The CU…
More deals from Arccaptain
-36%
-36%
-28%
-27%
-25%
-23%
-22%
-21%