ARCCAPTAIN CUT55 Pro Pilot Arc Plasma Cutter Kit for Garage DIY

Name: ARCCAPTAIN CUT55 Pro Pilot Arc Plasma Cutter Kit for Garage DIY
Brand: Arccaptain
Price: 285.99 USD
Availability: InStock

$285.99~~$390.99~~27% off

You save $105.00 vs. Arccaptain's list price

Claim $105.00 off at Arccaptain

Price from Arccaptain's store on 04 Nov 2026. Prices change, so confirm at checkout.

Comparing options? Read The 6 Best MIG Welders for Home and Garage.

About this product

Product details from Arccaptain:

The Essential CUT Bundle combines the CUT55 Pro dual-voltage pilot arc plasma cutter with additional AG60 gun parts.

The CUT55 Pro delivers up to 55A on 240V and up to 35A on 120V. Its non-contact pilot arc helps cut clean, rusty, painted, or coated conductive metal without touching the torch tip to the workpiece.

The additional AG60 parts provide replacement wear items for routine cutting and torch maintenance. This package suits garage repairs, automotive work, maintenance, and general handheld fabrication.

External Equipment Required: A clean, dry air compressor rated at least 90 PSI, 5 CFM, and 10 gallons.

Bundle Highlights

Full 55A Cutting Power: Use 240V for full output and up to a 1/2-inch clean cut.

Flexible Dual-Voltage Input: Switch between compatible 120V and 240V power for different work locations.

Non-Contact Pilot Arc: Start cuts on rusty, painted, or dirty metal without touching the torch tip.

Extra AG60 Parts Available: Keep compatible wear parts nearby for routine torch maintenance.

Fewer Separate Parts Orders: Get the cutter and additional AG60 parts in one purchase.

What's Inclused?

Included Item	Purpose
1 × CUT55 Pro Plasma Cutter	Provides up to 55A output on 240V and up to 35A on 120V.
1 × Preinstalled Air Compressor Filter	Helps reduce moisture and contaminants entering the torch air supply.
1 × AG-60 Cutting Torch with Accessories	Directs the plasma arc for handheld cutting with compatible AG60 wear parts.
1 × 200A Ground Clamp with DKJ 10-25 Connector	Completes the electrical cutting circuit through the conductive workpiece.
1 × Gas Hose	Carries compressed air from the external compressor to the cutter.
2 × Hose Clamps	Secure the air hose at its connection points.
1 × 240V-to-120V Voltage Adapter	Supports connection to compatible 120V power when required.
1 × Carry Strap	Helps carry the 11.5 lb cutter between work areas.
1 × Operator Manual	Provides setup, operating, and safety instructions for the CUT55 Pro.
1 × Dust Cover	Helps keep settled dust off the stored machine.
AG60 Gun Parts	These compatible wear parts replace used AG60 torch components, helping maintain cutting performance and reduce unplanned stops.

CUT55 Pro Technical Specifications

Specification	Product Information
Model	CUT55 Pro
Product Type	Dual-Voltage Pilot Arc Plasma Cutter with App Control
Input Voltage	120V / 240V AC, Single Phase, 50/60 Hz
Maximum Output	55A on 240V; 35A on 120V
Output Current Range	20–55A on 240V; 20–35A on 120V
Rated Input Capacity	9.4 kVA on 240V; 5.5 kVA on 120V
Cutting Process	Handheld Plasma Cutting with Pilot Arc
Clean Cut	240V: Up to 1/2 in.; 120V: Not separately specified
Maximum Severance	240V: Up to 3/4 in.; 120V: Not separately specified
Arc Starting Method	Non-Contact Pilot Arc
Supported Materials	Mild Steel, Carbon Steel, Stainless Steel, Aluminum, Copper, and Other Electrically Conductive Metals
Torch / Consumables	AG60 Plasma Torch and Compatible AG60 Consumables
App Control	Bluetooth App Control for Remote Adjustment and Machine Monitoring
Trigger Modes	2T / 4T
Post-Flow Time	5 Seconds
Operating Air Pressure	29–72 PSI
Recommended Air Supply	At Least 90 PSI, 5 CFM, and a 10-Gallon Tank
Duty Cycle	60%
No-Load Voltage	330V
Cooling System	Air-Cooled with Smart Fan Control
Protection Features	Smart Fan Cooling and IP21S Enclosure
Efficiency	85%
Insulation Class	Class H
Dimensions	17.8 × 9.6 × 6.1 in.
Weight	11.5 lb
CNC Compatible	No
Warranty	3 Years